Winkelmandje tonen (0 Artikel) Uw accountVerlanglijstje tonenNaar de kassa

Free Form kneedbare epoxy

Free Form® is een boetseerbare, plastische klei die geschikt is voor het boetseren van fijn detail met behulp van gereedschap of vorming met de hand. Dit is een geur-arme, krimp-arme epoxy die betaalbaar is en gemakkelijk te gebruiken voor een verscheidenheid aan kunstgerelateerde en industriële toepassingen.

Technical bulletin Free Form AIR
Technical bulletin Free Form SCULPT

  • -AIR
  • -SCULPT
  • -HABITAT BLACK
  • -HABITAT FIRE SAFE
  • -DETAILER

Free Form®AIR is an extremely lightweight epoxy putty suitable for an infinite variety of industrial and art-related applications. This is a low-odor, low shrinkage putty that is unique, inexpensive and easy to use. Free Form®AIR is mixed by hand with a 1A:1B by volume mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. Cured Free Form®AIR is so lightweight, it will float in water. It can be sanded, shaped, drilled, tapped and CNC machined/routed. It will readily accept any paint. Free Form can also be color pigmented with SO-Strong® or Ignite® colorants.

Free Form Sculpt

  • Free Form™ SCULPT /7,2 kg

    Free Form™ SCULPT /7,2 kg

    221,82 EUR

  • Free Form™ SCULPT /36,28 kg

    Free Form™ SCULPT /36,28 kg

    971,52 EUR

Uses

After mixing, Free Form®AIR can be pressed into a mold to make a lightweight, detailed casting. It will hold vertical surfaces and can be applied to almost any surface including polystyrene foam for rough sculpting. Free Form®AIR putty can also be used to make rigid support shells or mother molds.

Epoxy Laminating: Laminate Free Form®AIR putty in between layers of EpoxAmite® Laminating Epoxy and fiberglass cloth, carbon or other fiber for making lightweight composite parts. Eliminates the need to make multiple layers of laminating with liquid epoxy; saves time and labor. Epoxy Tooling Applications – use as a filleting material. Also good for jig and fixture construction.

Used as a lightweight adhesive, Free Form®AIR will bond to itself and a variety of surfaces including wood, stone and EpoxAcoat® Red surface coat epoxy. Free Form®AIR will even cure under water.

Pot Life/Working Time: this material is mass sensitive. The more material you mix at one time, the less time you have to work with it. Working tip; If mixing a large quantity, flatten putty with a rolling pin to reduce mass concentration and extend pot life.

Thickness; 1.5 inch (3.81 cm) – pot life is 30 minutes, handling time is 2.5 hours, full cure in 24 hours.
Thickness; 3/8” (0.95 cm) – pot life is 60 minutes, handling time is 4 hours, full cure in 24 hours.
Thickness; 1/8” (0.32 cm) - pot life is 120 minutes; handling time is 8 hours, full cure in 24 hours.

Free Form® SCULPT is a two part sculpt-able epoxy clay that requires no firing and will self-cure in a short time to an extremely hard and durable state with virtually no shrinkage. SCULPT is 30% lighter than similar products and holds vertical surfaces better. Users can sculpt larger, stronger pieces with more control over weight distribution. Free Form SCULPT has an ultra fine particle size that gives the user the ability to sculpt finer detail with better precision using tools or shaping by hand.

A mirror-like, gloss finish can be achieved by smoothing SCULPT with water before it cures

Free Form Habitat Black

  • Habitat™ Black /1,93 kg

    Habitat™ Zwart /1,93 kg

    66,89 EUR

Features

Maximum Usability - Just Add Water; you can change the consistency and workability of Free Form® SCULPT by adding water when mixing A+B components. Putty surface can be smoothed with water while sculpting.

Parts A & B are mixed in equal amounts by hand. Working time is a long 1.5 hours and Free Form® SCULPT cures overnight to a hard, rigid epoxy that is very strong and waterproof. SCULPT is easily colored by adding SO-Strong color tints to create marble or other effects. Cured putty is easily painted with acrylic paints.

Free Form® SCULPT does not contain crystalline silica (which is a known carcinogen). It can be safely sanded, shaped, and painted.

Used as a repair adhesive, Free Form® SCULPT will bond to itself and a variety of surfaces including wood, metal, glass, stone, and concrete. Free Form® SCULPT will even cure under water.

Free Form Habitat Fire Safe

  • Habitat™ Fire Safe /1,91 kg

    Habitat™ Fire Safe /1,91 kg

    57,45 EUR

Free Form Detailer

  • Free Form™ Detailer /30 ml

    Free Form™ Detailer /30 ml

    6,93 EUR

  • Free Form™ Detailer /360 gr

    Free Form™ Detailer /360 gr

    21,76 EUR

Free Form® Detailer is a low viscosity liquid that makes adding details and detail effects to the surface of Free Form® Sculpt Epoxy Putty easy.

Features

Control and Precision - Detailer liquid enhances sculpting precision which allows you to quickly integrate dynamic strokes, fine lines, minute, and repeating texture details (such as hair, fur, or feathering). With Free Form® Detailer you can also smooth, stamp, extrude, etc.

Detailer keeps putty from sticking to sculpting tools and will not pull or stretch putty. Keeping tools clean means no build up and greater accuracy when sculpting.

The more Detailer you apply, the more workable the putty surface becomes; giving you a broader range of possible surface textures and finishes.

Applied as a finishing coat, Detailer will leave a glossy surface.

Unlike water or general purpose solvents, Detailer does not leave a chalky residue on uncured or cured epoxy and does not affect paint adhesion. Detailer can also be used for clean-up and will help loosen and remove uncured epoxy from most solid surfaces.

Instructions

Directions - To apply, spray a thin layer of Free Form® Detailer across the uncured epoxy surface before texturing or stamping the Free Form® Sculpt epoxy putty. Re-apply as necessary. A light spray can also be applied to wood, metal, and some plastic sculpting tools before tooling the Free Form® Sculpt material. A small scale test applying Free Form® Detailer for compatibility with your specific tool is recommended before use. When hand applying Free Form® Sculpt epoxy putty, a small amount of Free Form® Detailer can be sprayed on to gloved hands to reduce adhesion. If glossy surface is desired, spray a thin covering of Free Form® Detailer over epoxy putty surface as a finishing coat. Let dry and allow Free Form® Sculpt to cure as directed.

Kieswijzer

Hier vindt u onze produkten gerangschikt naar diverse toepassingsmogelijkheden, zoals: Lifecasting, boetseren, afvormen, gieten, make-up, stuntwerk, dentaalwerk en studie.

  • Afvormen

    fllexibele materialen voor mallen: siliconen, pu-rubbers, alginaat etc.

  • Cold Casting

    Metaalpoeders en plastics voor het "koud" gieten van IJzer, Brons, Messing of Tin.

  • Composieten

    Harsen, polyester, epoxy, acrylhars, glasvezels enz.

  • Cosplay

    Producten om je eigen cosplay kostuums en rekwisieten te maken

  • Gietmaterialen

    Materialen voor het gieten van harde of flexibele objecten.

  • Prototyping

    Materialen die worden gebruikt voor rapid prototyping

  • Restauratie

    Voor het vervaardigen en herstellen van architectuur en ornamentiek.

  • Schuimen

    Liquid Flexible Foam, Liquid Rigid Foam, Rigid Foam Blocks

  • Special Properties

  • Textiel

FormX Newsletter Nieuwsbrief Over ons Contact Verkoopvoorwaarden Verzending we have vacancies FormX Academy Merken Toepassingen Is dit de baan voor jou?

Wij gebruiken cookies om onze website te optimaliseren en u de best mogelijke online ervaring te bieden. Door op "alles accepteren" te klikken gaat u hiermee akkoord. Geavanceerde instellingen