Winkelmandje tonen (0 Artikel) Uw accountVerlanglijstje tonenNaar de kassa

Ease Release® 2831

Ease Release® 2831 is a wax-based non-silicone release agent. It has proven to be effective when used to release polyurethane foams elastomers. Ease Release® 2831 works with aluminum, steel, and elastomeric mold construction.

Technical bulletin Ease Release 2831

  • ER2831 / 300gr

    Afdichting en losmiddel, op was gebaseerd, 0,3 kg

    26,60 EUR (Prijs exclusief 21% BTW)

Transport Regulated Goods

The transport of items out of this group can be restricted due to EU restrictions and regulations and will require a specialized carrier. Transport costs will not be automatically calculated. We will give you transport options and a quote later. Preparing this order for transport will not fit within our normal time frame and delivery may take a few days longer.

Instructions
Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.

SHAKE WELL BEFORE USING

Applying - Apply a coat of Ease Release® 2831 with a spray or brush, and allow to dry. Rub Ease Release® 2831 into mold surface with a clean cloth. Repeat two or three times to seal the mold surface. Start molding and reapply a light coat of Ease Release® 2831 after each molding cycle.

Finishing - Thorough cleaning of the molded parts is recommended prior to bonding or any other post mold finishing.

GUIDE

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Afvormen

    fllexibele materialen voor mallen: siliconen, pu-rubbers, alginaat etc.

  • Special Properties

  • Gietmaterialen

    Materialen voor het gieten van harde of flexibele objecten.

  • Schuimen

    Liquid Flexible Foam, Liquid Rigid Foam, Rigid Foam Blocks

  • Compositen

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Cold Casting

    Metaalpoeders en plastics voor het "koud" gieten van IJzer, Brons, Messing of Tin.

  • Restauratie

    voor het vervaardigen en herstellen van architectuur en ornamentiek.

  • Prototyping

    Materials used for rapid prototyping

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Over ons Contact Costumer Projects Verzending Merken Branches Jesmonite Workshop