High Performance Casting Resins

Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.

Task Series

TASK ® Kunststoffen zijn een nieuwe generatie urethaan gietharsen die superieure fysische eigenschappen bieden tegenover onze populaire Smooth-Cast lijn gietharsen. TASK ® Plastics zijn gemakkelijk af te wegen in zowel gewicht als volume, hebben een lage viscositeit, hoge trek-en buigsterkte, en een hoge buigmodulus. Deze harsen zijn ontworpen voor het gieten in diktes tot ½ "(1,27 cm).

Task 2&3 Veiligheidsinformatie

- Lees het veiligheidsinformatie label. Klik op de afbeelding.

- Read the safety information label. Click on the image

- Lisez les informations de sécurité cliquez sur l'image

- Lea la etiqueta de información de seguridad. Haga clic en la imagen

- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.

Task 2&3 producten

Task™ 2 /0,86 kg Shore Hardness 80D - Cure time 60 min 27,20 EUR
Task™ 2 /7,26 kg Shore Hardness 80D - Cure time 60 min 171,06 EUR

Task™ 3 /0,86 kg Shore Hardness 80D - Cure time 90 min 27,20 EUR
Task™ 3 /7,26 kg Shore Hardness 80D - Cure time 90 min 171,06 EUR

Task 2&3

Technical bulletin Task 2 & 3

TASK® 2 & TASK® 3low viscosity, high performance casting resins offer superior physical and performance properties
compared to our popular Smooth-Cast® Series of general purpose casting resins. Vacuum degassing is not necessary and
they offer the convenience of a 1A:1B by volume (120A:100B by weight) mix ratio. The difference between TASK® 2 &
TASK® 3 is the pot life and demold time.
TASK® 2 & TASK® 3 are white. They have high tensile and flexural strength, as well as high flexural modulus. These
plastics were formulated for a variety of industrial applications including pattern making and making prototype
models. These resins are designed for casting in thicknesses up to ½” (1.27 cm).

Task 4 Veiligheidsinformatie

Task 4

Technical bulletin Task 4

TASK® 4 is a unique polyurethane casting resin that is very strong when cast in Ultra-Thin sections ranging from 0.03” to
0.50”(0.075cm to 1.27cm). TASK® 4 has a very low mixed viscosity, ensuring flawless pick-up of even the finest detail. Cured
plastic exhibits very low shrinkage which is why this plastic has become a favorite of prototype and design professionals
throughout the world. Pot life is 20 minutes and cure time is 16 hours at 73°F/23°C.
Vibrant colors and color effects are possible by adding SO-Strong® color tints. Fully cured models made from TASK® 4 are
tough, durable, machinable and paintable. They resist moisture and mild solvents. Applications for TASK® 4 include making
prototype and architectural models, model toys, durable miniatures, ultra-thin mechanical parts and special effect props.

Task 4 producten

Task™ 4 /0,91 kg Shore Hardness 83D - Cure time 16H 28,53 EUR

Task™ 4 /7,26kg Shore Hardness 83D - Cure time 16H 170,92 EUR

Task 5 Veiligheidsinformatie

- Lees het veiligheidsinformatie label. Klik op de afbeelding

- Read the safety information label. Click on the image

- Lisez les informations de sécurité cliquez sur l'image

- Lea la etiqueta de información de seguridad. Haga clic en la imagen

- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.

Task 5

Task™ 5 /0,91 kg Shore Hardness 77D - Cure time 15 min 25,12 EUR

Task 5&6

Technical bulletin Task 5 & 6
TASK® 5 & TASK® 6 low cost, high performance casting resins yield castings that are tan and virtually bubble free.
These resins offer superior physical and performance properties compared to our popular Smooth-Cast® Series of
general purpose casting resins. Vacuum degassing is not necessary and they offer the convenience of a 1A:1B by volume or
weight mix ratio. The differences between TASK®5 and TASK®6 are the pot life and demold time.
TASK® 5 & TASK® 6 have high tensile and flexural strength, as well as high flexural modulus. These plastics were formulated
for a variety of industrial applications including pattern making and making prototype models. These resins are designed for
casting in thicknesses up to ½” (1.27 cm).

Task 6 Veiligheidsinformatie

Task 6

Task™ 6 /0,94 kg Shore Hardness 75D - Cure time 75 min 25,12 EUR

Task 6

Technical bulletin Task 5 & 6

TASK® 5 & TASK® 6 low cost, high performance casting resins yield castings that are tan and virtually bubble free. These resins offer superior physical and performance properties compared to our popular Smooth-Cast® Series of general purpose casting resins. Vacuum degassing is not necessary and they offer the convenience of a 1A:1B by volume or weight mix ratio. The differences between TASK®5 and TASK®6 are the pot life and demold time. TASK® 5 & TASK® 6 have high tensile and flexural strength, as well as high flexural modulus. These plastics were formulated for a variety of industrial applications including pattern making and making prototype models. These resins are designed for casting in thicknesses up to 1.27 cm (½”).

Task 7 Veiligheidsinformatie

Task 7 producten

Task™ 7 /0,94 kg Shore Hardness 73D - Cure time 10 min 57,54 EUR

Task™ 7 /8,34 kg Shore Hardness 73D - Cure time 10 min 361,10 EUR

Task 7

Technical bulletin Task 7

Task 7 - "Flame Out" is a low viscosity, fast set casting resin that meets UL 94 V-O requirements for flame resistance. It does not
contain mercury, TDI or MOCA. Mix ratio is 1A:1B by volume. Pot life is 2.5 min. and demold time is 10 min. at 73°F / 23°C
(depending on mass).
Fully cured Flame Out® material is tough, durable, machinable and paintable. It has much higher physical and performance
properties than any other flame rated urethane available anywhere. Vibrant colors and color effects are possible by adding
SO-Strong® color tints. Applications for Flame Out® include making flame resistant prototype and architectural models, model
toys, theme park and stage elements, durable miniatures and special effect props. Material can also be used for potting and
encapsulation applications.

Task 8 producten

Task™ 8 /0,94 kg Shore Hardness 80D - Cure time 15 min 26,46 EUR

Task™ 8 /7,48 kg Shore Hardness 80D - Cure time 15 min 154,03 EUR

Task 8 Veiligheidsinformatie

Task 8

Technical bulletin Task 8

TASK® 8 is a heat resistant polyurethane resin system made specifically for prototyping / casting applications which
require thermal resistance of up to 263°F /129°C.
TASK® 8 offers the convenience of a 1A:1B mix ratio and has a very low viscosity, so it is easy to mix and pour. Plastic cures
quickly to a Shore 80D and exhibits good physical and performance properties. Heat curing this material is necessary to
attain optimal heat resistance. See “Heat Curing” section for curing schedule details.
Applications include making machine housings, thermo-forming
and general prototyping / casting.

Task 11 Veiligheidsinformatie

Task 11 producten

Task™ 11 /0,94 kg Shore Hardness 60D - Cure time 16 H 35,76 EUR

Task™ 11 /7,26kg Shore Hardness 60D - Cure time 16 H 242,61 EUR

Task 11

Technical bulletin Task 11TASK® 11 urethane casting resin is a semi-rigid plastic (has some flexibility) that is strong and very tough. Originally
developed for high impact tooling (drop hammer punch), TASK® 11 also offers good abrasion and chemical resistance and
is ideal for a variety of industrial applications.
This product is suitable for some FDA/USDA applications - dry food contact only.
TASK® 11 applications include making abrasion resistant parts, foundry patterns, encapsulation, roller facings, metal
bonding and vibration pads.

Task 12

Technical bulletin Task 12TASK® 12 is part of the TASK® series of high performance casting resins. It is a semi-rigid urethane resin that offers
extraordinary handling strength and impact resistance. Castings are tough and durable. TASK® 12 can be color
pigmented or filled and is used for a variety of industrial applications including making prototype models, high impact
parts and tools.
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. Proper ventilation, a NIOSH
Approved Respirator and Protective Clothing are required to minimize the risk of inhalation and dermal
sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek
medical attention.Read MSDS before using.

Task 12 Veiligheidsinformatie

Task 12 Safety Part A

Task 12 Safety Part B

Task 12 producten

Task™ 12 /0,94 kg Alleen beschikbaar bij WWW.FORMX.BIZ

Task 13&14 producten

Task™ 13 /0,94 kg Shore Hardness 50D - Cure time 20 min 35,03 EUR

Task™ 14 /0,94 kg Shore Hardness 50D - Cure time 45 min 35,03 EUR

Task™ 14 /8 kg Shore Hardness 50D - Cure time 45 min 273,75 EUR

Task 14 Veiligheidsinformatie

- Lees het veiligheidsinformatie label. Klik op de afbeelding.

- Lea la etiqueta de información de seguridad. Haga clic en la imagen

- Lisez les informations de sécurité cliquez sur l'image

- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.

- Read the safety information label. Click on the image

Task 15 producten

Task™ 15 /0,94 kg Shore Hardness 75D - Cure time 1 h 00 37,53 EUR

task15 Veiligheidsinformatie

- Lees het veiligheidsinformatie label. Klik op de afbeelding.

- Lisez les informations de sécurité cliquez sur l'image

- Lea la etiqueta de información de seguridad. Haga clic en la imagen

- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.

Task 15

Technical bulletin Task 15

TASK® 15 is a premium performance urethane resin that exhibits exceptional impact strength when cast in thin-wall
sections. TASK® 15 features a gradual cure profile, making it ideal for rotational casting applications. Pot life is 6
minutes and handling time 60 minutes at room temperature. Vibrant colors are possible by adding small amounts of
SO-Strong® tint or IGNITE® fluorescent colors. Plastic fully cures with negligible shrinkage and can be machined, sanded
and/or painted.

Task 13&14

Technical bulletin Task 13 & 14
TASK® 13and TASK® 14 are fast setting two-component urethanes that cure quickly to black semi-rigid plastics.
TASK® 13 has a pot life of 3 minutes and demold time of 20 minutes. TASK® 14 offers a longer pot life (10 minutes) and
demold time of 45 minutes.
With a Shore value of 50D, these semi-rigid plastics are used for a variety of industrial applications including fast mold
making, fast model duplication, prototyping, durable miniatures, black props and special effects, or making parts that
are impact resistant. Fully cured castings are tough, durable and chemical resistant.

Task 16 Veiligheidsinformatie

Task 16 Part A Safety

Task 16 Part B Safety

Task 16 producten

Task™ 16 /1,36 kg Shore Hardness 30D - Cure time 24 h00 45,76 EUR

Task™16 /10,9 kg Shore Hardness 30D - Cure time 24 h00 289,57 EUR

Task 16

Technical bulletin Task 16

TASK®16 is a low odor, fast-setting Shore 80A/30D urethane that offers very high tear strength, impact resistance
and wear resistance. TASK®16 is phthalate free, mercury free and MOCA free. Mixed one part A to two parts B by
weight, TASK®16 pours easily. Working time is 6 minutes and handling time is 90 minutes at room temperature.
Cured rubber has exceptional performance characteristics and dimensional stability. TASK® 16can be colored with SOStrong® or Ignite® colorants.
TASK®16 is suitable for making fast mechanical parts, gaskets, wheels and pullies, impact resistant props, and archival
master models. It is also used to make fast, wear resistant rubber molds for casting concrete or concrete stamping pads.
TASK®16 is also an excellent choice for rotocasting to create hollow semi-rigid castings.
IMPORTANT:Cured TASK® 16 will inhibit the cure of liquid platinum silicone. You can not pour platinum silicone into
cured TASK® 16. Tin silicone must be used if you intend to pour silicone against cured TASK® 16.

Task 18 Veiligheidsinformatie

Task 18 producten

Task™ 18 /1,4 kg Shore Hardness 88D - Cure time 16 h00 65,92 EUR

Task™ 18 /5 kg Shore Hardness 88D - Cure time 16 h00 202,78 EUR

Task 18

Technical bulletin Task 18

Task-18 is een aluminium gevulde giethars die ontwikkeld werd voor het maken van vacuumvorm matrijzen. Deze hars heeft een hoge oppervlakte hardheid en kan goed verspanend verwerkt worden. Task-18 wordt ook gebruikt voor industriele onderdelen, prototype's en traceer sjablonen

Task 21 Veiligheidsinformatie

Task 21 producten

Task™21 /1,36 kg Shore Hardness 75D - Cure time 1 h00 67,60 EUR

Task 21

Technical bulletin Task 21

TASK® 18 is a relatively low viscosity aluminum filled urethane casting resin that was developed specifically for making
short run vacuum forming molds. When Parts A and B are mixed in proper proportion, TASK® 18 cures overnight at room
temperature with negligible shrinkage to a very hard plastic that has a very high compressive and flexural strength. Cured
TASK® 18 can be polished, machined, drilled, painted, etc. TASK® 18 is also used to make industrial production parts,
prototype parts and tracing patterns.

Task Series Overview

product	main quality	TB	MSDS
Task 2&3	High strength, low viscosity	Task 2&3 TB	Task 2&3 MSDS
Task 4	Very strong in thin walled sections	Task 4 TB	Task 4 MSDS
Task 5&6	Lowest cost performance plastics anywhere	Task 5&6 TB	Task 5&6 MSDS
Task 7	Flame rated - fire resistant urethane resin	Task 7 TB	Task 7 MSDS
Task 8	Heat resistant urethane plastic	Task 8 TB	Task 8 MSDS
Task 9	COLORMATCH Neutral amber for color matching and pigmenting	Task 9 TB	Task 9 MSDS
Task 11	Semi-rigid resin - dry food applications	Task 11 TB	Task 11 MSDS
Task 12	Virtually indestructible - highest impact resistance	Task 12 TB	Task 12 MSDS
Task 13 & 14	Black semi-rigid urethane casting resins	Task 13 & 14 TB	Task 13 & 14 MSDS
Task 15	For machine rotocasting - high impact resistance	Task 15 TB	Task 15 MSDS
Task 16	offers very high tear strength, impact resistance and wear resistance.	Task 16 TB	Task 16 MSDS
Task 18	Aluminum filled mass casting resin	Task 18 TB	Task 18 MSDS
Task 21	Customers have used to approximate ABS plastic properties for some applications NOTE-TASK® 21 CAN NOT be cast into platinum silicone molds.	Task 21 TB	Task 21 MSDS

Task Series Physical Properties Tabel

product name	A:B mixing ratio	color	comp. strength	demold time	mixed viscosity	pot life	tensile strength	ultimate shore hardness	specific weight (g/cm3)
Task 2	1A:1B volumetric	White	8300 psi	60 min.	150 cps	7 min	6650 psi	80D	1.12
Task 3	1A:1B volumetric	White	7400 psi	90 min	150 cps	20 min	6650 psi	80D	1.12
Task 4	1A:1B by weight	Ivory	7400 psi	16 hours	250 cps	20 min	6500 psi	83D	1.16
Task 5	1A:1B volumetric	Tan	6700 psi	15 min	600 cps	3 min	4530 psi	77D	1.12
Task 6	1A:1B volumetric	Tan	5570 psi	75 min	800 cps	7 min	5200 psi	75D	1.09
Task 7	1A:1B volumetric	White	5140 psi	10 min	200 cps	2.5 min	3390 psi	73D	1.14
Task 8	1A:1B volumetric	Off-White	8760 psi	10-15 min	100 cps	2.5 min	5840 psi	80D	1.09
Task 9	1A:1B volumetric	Clear Amber	11000 psi	60 min	300 cps	7 min	7800 psi	85D	1.14
Task 11	1A:1B by weight	Milky Amber	N/A	16 hours	2000 cps	20 min	2500 psi	60D	1.12
Task 12	100A:44B by weight	Clear Amber	N/A	16 hours	2400 cps	20 min	2700 psi	60D	1.08
Task 13	100A:120B by weight	Black	N/A	20 min	800 cps	3 min	1800 psi	50D	1.14
Task 14	100A:120B by weight	Black	N/A	45 min	800 cps	10 min	1800 psi	50D	1.14
Task 15	75A:100B by weight	Opaque White	5450	60 min	600 cps	6 min	2720 psi	75D	0.42
Task 16	1A:2B by weight	Light Yellow	N/A	90 min	1400 cps	6 min	2264 psi	80A/30D	0.25
Task 18	26A:100B by weight	Metal Grey	8420 psi	16 hours	4400 cps	20 min	3250 psi	88D	1.57
Task 21	2A:1B volumetric	White	7100 psi	60 min	500 cps	6 min	5500 psi	75D	1.06

Task "Flame Out" Video

Benodigdheden

	Mengbekers
	Maatcylinders & bekers
	Weegapparatuur
	Kwasten
	Veiligheidsmaterialen
	Losmiddellen

Mengen, Meten & Wegen

maatbeker 30ml Measuring cup 30ml + graduation 0,19 EUR
maatbeker 125 ML Measuring cup 125 ML + Graduation 0,48 EUR
Mixing Beaker rond / 500cc 500 cc contents 0,25 EUR
Mixing Beaker rond /1000cc plastic mixing beaker 1162 ml 0,64 EUR
Mengbeker Smooth-On / 473ml Mengbeker Smooth-On / 16oz 1,04 EUR
mengbeker Smooth-On / 946ml mengbeker Smooth-On / 32oz 1,09 EUR
mengbeker Smooth-On / 1892ml mengbeker Smooth-On / 64oz 2,84 EUR

mengbeker Smooth-Onr / 4880ml mengbeker Smooth-Onr / 165oz 3,35 EUR
Mengbeker Colad met maatregistratie / 350ml 0,57 EUR
Mengbeker Colad Met maatregistratie / 700ml 0,63 EUR
Mengbeker Colad met maatregistratie / 1400ml Mengbeker Colad met maatregistratie / 1400ml 0,80 EUR
Mengbeker Colad Met maatregistratie / 2300ml 1,46 EUR
Flexibele Mengbeker - 500 ml Voor gips en alginaat 8,05 EUR
Flexibele Mengbeker - 1750 ml Voor gips en alginaat 19,34 EUR

Tongspatels voor medisch En niet medisch gebruik 3,42 EUR
roerhoutje, klein - 220x17x3 mm roerhoutje, klein - 220x17x3 mm 0,05 EUR
roerhoutje, groot - 300x20x4 mm roerhoutje, groot - 300x20x4 mm 0,24 EUR
Tristar weegschaal KW2430 Digitale keukenweegschaal. Weegt tot 2kg op 1 gram nauwkeurig. Excl. batterij. 20,21 EUR
injectiespuit 50 cc met catheterpunt injectiespuit 50 cc met catheterpunt 5,76 EUR
Colad Turbomix /per 200 200 stirrers in dispenser. 61,38 EUR
Turbine Mixer Turbine Mixer 16,11 EUR
mengbak vierkant wit /2000ml Square mixing Bowl white 180x180 mm; 2000 cc 0,91 EUR

Kwasten

flat brush 30mm platte wegwerpkwast 0,80 EUR
flat brush 40mm platte wegwerpkwast 0,92 EUR
flat brush 50mm platte wegwerpkwast 1,39 EUR
flat brush 60mm platte wegwerpkwast 1,38 EUR

flat brush 70mm platte wegwerpkwast 1,39 EUR
Calupaint Platte Calupaint Platte 2,60 EUR
polyesterkwast 20mm polyester brush 20mm round 3,09 EUR
polyesterkwast 25mm polyester brush 25mm round 3,51 EUR

houten polyesterkwast 35mm houten polyesterkwast 35mm plat 2,21 EUR
houten polyesterkwast 50mm plat wooden polyester brush 50mm flat 3,46 EUR
Polyester kwast plat 75mm Polyester brush, Flat, 75 mm 3,33 EUR
kwast plat 40mm Brush, flat, 40mm, wooden handle. 2,84 EUR

Losmiddelen

Spray
Safety Info Universal Mold release
Ease Release™ 200 / 400gr Ease Release™ 200 / 400gr 19,54 EUR
Ease Release™ 300 / 400gr Ease Release™ 300 / 400gr 18,22 EUR
Ease Release™ 400 / 400gr Ease Release™ 400 / 400gr 21,33 EUR

Spray
Safety Info Ease Release Group
Ease Release™500 / 400gr Ease Release™500 / 400gr 22,30 EUR
Acmos 82 aerosol / 400gr Afwasbare universeel lossingsmiddel / was in aerosol spuitbus 20,63 EUR

Spray
Safety Info Acmos
Universal Mold Release aerosol / 400gr Op Silicone gebaseerde Universal lossingsmiddel - aerosol spuitbus 400 gr 17,05 EUR
Kwikee Sprayer - 946 ml Pressure Sprayer The Kwikee sprayer is an economical alternative to aerosols for dispensing release agents and sealing agents. It is a faster, labor-saving way to cover large models or molds and delivers sealing a... 138,57 EUR

Bescherming

Stenchmask carbon fibre Stenchmask carbon fibre 5,41 EUR
Filter ABEK1 for 3M 6200 maskers Protection against chemicals vapors 36,87 EUR
Paint spray mask Colad Easy to wear paint spray mask. 35,39 EUR

3M 06941 Halfgelaatmaske FFA1P2D 50,53 EUR
Protective Glove Nitrile S Protective Glove Nitrile Small 11,01 EUR
Protective Glove Nitrile L Protective Glove Nitrile Large 11,01 EUR

Protective Glove Nitrile XL Protective Glove Nitrile Extra Large 11,01 EUR
Protective Glove Nitrile M Protective Glove Nitrile Medium 11,01 EUR
3M safety glasses Classic 3M safety glasses Classic 15,19 EUR

Deze pagina afdrukken

High Performance Casting Resins

Buy Smooth-On at FormX

Task Series

Task 2&3 Veiligheidsinformatie

Task 2&3 producten

Task 2&3

Task 4 Veiligheidsinformatie

Task 4

Task 4 producten

Task 5 Veiligheidsinformatie

Task 5

Task 5&6

Task 6 Veiligheidsinformatie

Task 6

Task 6

Task 7 Veiligheidsinformatie

Task 7 producten

Task 7

Task 8 producten

Task 8 Veiligheidsinformatie

Task 8

Task 11 Veiligheidsinformatie

Task 11 producten

Task 11

Task 12

Task 12 Veiligheidsinformatie

Task 12 producten

Task 13&14 producten

Task 14 Veiligheidsinformatie

Task 15 producten

task15 Veiligheidsinformatie

Task 15

Task 13&14

Task 16 Veiligheidsinformatie

Task 16 producten

Task 16

Task 18 Veiligheidsinformatie

Task 18 producten

Task 18

Task 21 Veiligheidsinformatie

Task 21 producten

Task 21

Task Series Overview

Task Series Physical Properties Tabel

Task "Flame Out" Video

Benodigdheden

Mengen, Meten & Wegen

Kwasten

Losmiddelen

Spray

Spray

Spray

Bescherming