Winkelmandje tonen (0 Artikel) Uw accountVerlanglijstje tonenNaar de kassa

Kneedbare epoxy

Free Form kneedbare epoxy

Habitat-AIR

Free Form™ AIR

  • Free Form™ AIR /3,1 kg

    Free Form™ AIR /3,1 kg

    166,83 EUR

  • Free Form™ AIR /15,42 kg

    Free Form™ AIR /15,42 kg

    798,06 EUR

Free Form Air

Free Form ® AIR is een extreem lichtgewicht epoxy putty die geschikt is voor een oneindige verscheidenheid aan industriële en kunst-gerelateerde toepassingen. Dit is een reukarme laagkrimpende putty die uniek, goedkoop en gemakkelijk te gebruiken is. Free Form ® AIR wordt met de hand gemengd in een gemakkelijke 1A: 1B volume mengverhouding. Het biedt een lange werktijd en hard in een nacht uit bij kamertemperatuur tot een harde, stijve epoxy die is erg sterk is met modelleer plaat-achtige eigenschappen. Uitgeharde Free Form ® AIR is zo licht, dat het zal blijven drijven in het water. Het kan worden geschuurd, gevormd, geboord, getapt en CNC gefreesd / routered. Het is gemakkelijk te beschilderen. Free Form kan ook gepigmenteerd worden met SO-Strong ® of Ignite ® kleurstoffen.

Na het mengen kan Free Form ® AIR in een mal worden geperst om zo een ​​lichtgewicht, gedetailleerd afgietsel te maken. Het blijft goed op verticale oppervlakken staan en kan worden aangebracht op vrijwel elk oppervlak zoals polystyreenschuim voor ruwe sculpturen. Free Form ® AIR kan ook worden gebruikt om harde steun mallen of moeder mallen te maken.
Epoxy Lamineren; Lamineer Free Form ® AIR putty tussen lagen EpoxAmite ® Lamineer Epoxy en glasvezel doek, koolstof weefsel of andere vezels voor het maken van lichtgewicht composiet onderdelen. Het Elimineert de noodzaak om meerdere lagen te lamineren met vloeibare epoxy, bespaart daarbij tijd en arbeid.

Gebruik het als een lichtgewicht lijm, Free Form ® AIR verlijmt met zichzelf en een verscheidenheid van oppervlakken zoals hout, steen en EpoxAcoat ® Red epoxy toplaag. Free Form ® AIR zal ook genezen onder water.

Werktijd; dit materiaal is massa gevoelig. Hoe meer materiaal je mengt in een keer, hoe minder tijd je hebt om ermee te werken. Verwerkings tip; Als je een grote hoeveelheid mengt, vlak de putty dan met een deegroller zodat de massa wordt verminderd en en daardoor de werkijd wordt verlengt.

- Dikte, 1,5 inch (3,81 cm) - verwerkingstijd is 30 minuten, hanteren van tijd is 2,5 uur, volledige uitharding in 24 uur.
- Dikte; 3/8 "(0,95 cm) - verwerkingstijd is 60 minuten, hanteren van tijd is 4 uur, volledige uitharding in 24 uur.
- Dikte; 1/8 "(0,32 cm) - pot life is 120 minuten; behandelende tijd is 8 uur, volledige uitharding in 24 uur.

-SCULPT

Free Form Sculpt

  • Free Form™ SCULPT /1,36 kg

    Free Form™ SCULPT /1,36 kg

    53,63 EUR

  • Free Form™ SCULPT /7,2 kg

    Free Form™ SCULPT /7,2 kg

    221,82 EUR

  • Free Form™ SCULPT /36,28 kg

    Free Form™ SCULPT /36,28 kg

    971,52 EUR

Free Form Sculpt

Free Form ® SCULPT is een tweedelige boetseerbare epoxy klei die geen verhitting vereist ter uitharding en in een korte tijd uit zal zichzelf zal uitharden tot een extreem hard en duurzaam eindproduct met vrijwel geen krimp. SCULPT is 30% lichter dan vergelijkbare producten en blijft beter op verticale vlakken staan. Gebruikers kunnen grotere, sterkere stukken beeldhouwen met meer controle over de verdeling van het gewicht. Free Form SCULPT bezit ultra fijne deeltjes die de gebruiker de mogelijkheid geven om fijnere details te boetseren met betere precisie.

Delen A en B worden met de hand gemengd in gelijke hoeveelheden. Werktijd is een lange 1,5 uur en Free Form ® SCULPT hard 's nachts uit tot een harde, stugge epoxy die zeer is sterk en waterdicht. SCULPT is gemakkelijk te kleuren door toevoeging van SO-Strong kleurtinten om zo marmer of andere effecten te creëren. Uitgeharde klei wordt gemakkelijk beschilderd met acrylverf.

Free Form ® SCULPT bevat geen kristallijn silica (dat is een bekend carcinogeen). Het kan veilig worden geschuurd, gevormd, en beschilderd.
Gebruikt het als een reparatie middel, Free Form ® SCULPT verlijmd zichzelf met diverse ondergronden zoals hout, metaal, glas, steen en beton. Free Form ® SCULPT zal ook onder water uitharden.

- BLACK

Free Form Habitat Black

  • Habitat™ Black /1,93 kg

    Habitat™ Zwart /1,93 kg

    66,89 EUR

Free Form Habitat Black

Free Form® Habitat® Black Epoxy Putty is a mix-by-hand putty that is used to create textured or highly detailed display pieces. Habitat® Black is solvent-free and contains no VOC's.

Working time is 60 minutes and cure time is 16 hours at room temperature at 73°F / 23°C. Epoxy cures to a very hard, heat resistant material that is easily painted.

Use with Habitat® Folding Powder – fold powder into epoxy putty to thicken and reduce sag when applied to a vertical surface. Folding Powder also reduces stickiness and makes the epoxy more handle-able.

Once putty is applied, it can be stamped with a silicone rubber stamp to create repeating patterns with intricate detail over a large surface area. Surface can be smoothed with alcohol or water. New Habitat® Black will bond to cured Habitat® Black without delamination. Habitat® Black will not melt foam, and can be used as an EPS foam coating.

Habitat® Black is suitable for interior and exterior use. It is certified "aquarium safe" and used by aquariums to create hyperrealistic coral and other aquarium displays. Habitat® Black is also used for general sculpting and theming applications.

Free Form® Habitat® Black is also an excellent repair cement and bonds permanently to itself, PVC, acrylic sheeting, wood, many metals, plastics and foams.

Fire Safe

Free Form Habitat Fire Safe

  • Habitat™ Fire Safe /1,91 kg

    Habitat™ Fire Safe /1,91 kg

    57,45 EUR

Free Form Habitat Fire Safe

Free Form® Habitat® Fire Safe epoxy putty is a high density epoxy sculpting putty that is flame rated (E84, Class A). Habitat® Fire Safe is solvent-free and contains no VOCs. Working time is 90 minutes and cure time is 16 hours at room temperature (73°F/23°C). Epoxy cures to a very hard, flame and heat resistant material that is easily painted. Fire Safe does not contain any carcinogens (cancer causing agents).

Free Form® Habitat® Fire Safe is suitable for interior and exterior theming applications and general sculpting. It is also certified 'aquarium safe' and is used by aquariums and zoos to make hyper-realistic trees, vines, rocks, coral and other display elements.

Use with Habitat® Folding Powder – fold powder into epoxy putty to thicken and reduce sag when applied to a vertical surface. Folding Powder also reduces stickiness and makes the epoxy more handle-able.

Once putty is applied, it can be stamped with a silicone rubber stamp to create repeating patterns with intricate detail over a large surface area. Surface can be smoothed with alcohol or water. New Habitat® Fire Safe will bond to cured Habitat® Fire Safe without delamination. Habitat® Fire Safe will not melt foam, and can be used as an EPS foam coating.

Free Form® Habitat® Fire Safe is also an excellent repair cement and bonds permanently to itself, PVC, acrylic sheeting, wood, many metals, plastics and foams.

- DETAILER

Free Form Detailer

  • Free Form™ Detailer /30 ml

    Free Form™ Detailer /30 ml

    6,93 EUR

  • Free Form™ Detailer /360 gr

    Free Form™ Detailer /360 gr

    21,76 EUR

Free Form Detailer

Free Form Detailer® is a low viscosity liquid that makes adding details and detail effects to the surface of Free Form Sculpt® Epoxy Putty easy.

Control and Precision - Detailer® liquid enhances sculpting precision which allows you to quickly integrate dynamic strokes, fine lines, minute, and repeating texture details (such as hair, fur, or feathering). With Free Form Detailer® You can also smooth, stamp, extrude, etc.

Detailer® keeps putty from sticking to sculpting tools and will not pull or stretch putty. Keeping tools clean means no build up and greater accuracy when sculpting.

The more Detailer® you apply, the more workable the putty surface becomes; giving you a broader range of possible surface textures and finishes.

Applied as a finishing coat, Detailer® will leave a glossy surface.

Unlike water or general purpose solvents, Detailer® does not leave a chalky residue on uncured or cured epoxy and does not affect paint adhesion. Detailer® can also be used for clean-up and will help loosen and remove uncured epoxy from most solid surfaces.

Hier vindt u onze produkten gerangschikt naar diverse toepassingsmogelijkheden, zoals: Lifecasting, boetseren, afvormen, gieten, make-up, stuntwerk, dentaalwerk en studie.

FormX Newsletter Nieuwsbrief Over ons Contact Verkoopvoorwaarden Verzending we have vacancies FormX Academy Merken Toepassingen Is dit de baan voor jou?

Wij gebruiken cookies om onze website te optimaliseren en u de best mogelijke online ervaring te bieden. Door op "alles accepteren" te klikken gaat u hiermee akkoord. Geavanceerde instellingen