Silicone paints are applied on a silicone piece after this has been created. There are special silicone paints in a variety of colors. You can also create your own paint with a silicone paint base combined with the silicone pigments of your choice.
Platinum Silicone paints have a natural glossy finish, so if you need to matt down the surface, WS Matting Powder is the way to go.
FuseFX WS-Series Matting Powder is a unique blend of water base matting agents designed to eliminate the shine off of silicone painted surfaces, giving it a flat matt finish with little to no sheen.
When used with M/F-110 Clear, the WS Matting Powder creates a little to no sheen surface.
WS Matting Powder residue washes off clean with a little soap and warm water, dries clean and does not leave a "blue" tint to the surface unlike Cabosil.
Contains NO Amorphous Silca or Cabosil.
Silicone paints are pigments that are dispersed in a special silicone medium and that can be applied with brush or airbrush on a silicone object. For a good and convincing result they are often applied in layers (layering technique). It is advisable to pre-pigment the receiving piece with a base tone (before casting) as to enhance the effect of the applied layers of paint. Often additional effects are achieved by adding fibres (Form-Flock) and fillers.
Psycho Paint® is a versatile and easy to use platinum silicone paint base developed to help special effects and
prosthetic artisans, doll makers, etc. easily create painted-on color effects for their platinum silicone creations.
It is a two component translucent clear platinum-cure silicone that is used to make a base for color
pigmenting. Once the desired color is attained, Psycho Paint® is thinned with a solvent. Thin layers of paint
can be then be applied to a model’s surface (made of Dragon Skin®, Ecoflex® or other platinum silicone) using
an airbrush. It can also be applied by brushing.
Colored Psycho Paint® will bond to the model’s surface and offers good abrasion resistance. It is very strong
and will stretch and bend with the model without cracking or peeling. Need to temporarily adhere your
silicone mask, prosthetic device or other creation to your skin? Ask your Smooth-On distributor about
“Slacker” Tactile Mutator and “Skin-Tite®” adhesion promoter.
The F-Series Silicone paints have been developed with the Special-FX Artists, Silicone Sculptors and Doll Artisans in mind. They contain a higher concentration of pigments for faster coverage, which is excellent for airbrush work.
With a wide range of colors, the F-Series will make painting realistic skin tones and special-FX props more attainable for the novices and more convenient for the pros.
The M-Series paints are excellent for creating the most realistic skin tone effects.
These precise colors are semi-transluscent and especially designed for intrinsic and extrinsic coloring.
TK- Series Trial Kits,
With 4 color bases to chose from, the new mini TK-Series Trial kit is a great way to discover what FuseFX paints are all about!
You get one 15 grams bottle of silicone pigment (enough to tint approx 1,400 grams of Platinum silicone) and three 3 grams mini packs of color.
One 6 grams portion of mixed color (3 grams of "Color" and 3 grams of Part "A"), can cover over 1 square foot of surface area when used by brush in a stippling fashion (can be airbrushed too!).
One customer reported that he had enough material in the kit to make 6 ear prosthesis.
PTK- Series Pro Trial 60 grams bottle kits,
This is the "big boys" trial kit! Everything needed to paint a beautiful skin tone.
The PTK-Series Trial Kit is a serious kit with larger volumes of FuseFX paints, you can do a lot of painting with this kit.
These new kits are now bigger with larger volume of paints, 60 grams per color.
These LY-Series Colors (AKA Layering colors) are a sheer skin tone paint and are a vital part in creating the perfect Intrinsic or Extrinsic skin tone finish.
For extrinsic painting, it is generally applied after the vein and the Blush layers, resulting in a perfect "under-the-skin" look. Final colors are then applied to complete the skin effect.
Use in corresponding FISC Silicone Pigments (AKA Functional Intrinsic Skin Colors).
EX: S-301 Light Flesh color pigment is equivalent to LY-01 Light, S-304 Light Flesh color pigment is equivalent to LY-04 Light, etc....
Silicone Pigments are mixed with a silicone base to aquire the right color-tone
Our SilTone silicone pigments are used with Psycho Paint Silicone
Paint system to create amazing paint effects on silicone
prosthetics and silicone body parts.
Designed to create life-like skintones opur Complete SilTone Kit has everything you need to get sarted with
silicone painting! This kit Includes: Light and Medium Skintone,
Mauve Tone, Freckle/Tan tone and Vein Blue and a set of Psycho
Paint.
Silc Pig® Silicone Pigments
are used for coloring tin-cure silicone rubber compounds such as Mold Max® translucent ‘T’ Series products and platinum-cure silicones such as Dragon Skin® and Ecoflex® rubbers. Silc Pig® also works well with Smooth-On’s skin effects systems such as Psycho Paint® and Skin Tite®.
Custom colors are possible by blending different Silc Pig® colors. Attaining just the right color for your application may require trial and error testing. Small scale testing is recommended before using substantial amounts of material for any project.
Silc Pig® pigments are very concentrated, so a little goes a long way when coloring Smooth-On silicone products. Recommended loading range is .001% to 3% of total silicone system weight.
DIRECTIONS:
Pre-mix Silc Pig® pigment in container before dispensing as settling may have occurred.
Add Silc Pig® colorant to the Part A side of the silicone rubber system and mix well before adding Part B. Do not overload silicone rubber with Silc Pig® or cure inhibition may occur.
S-Series skin bases and SFX skin bases
These FISC Silicone Pigments (AKA Functional Intrinsic Skin Colors) are the fundamental basics of all human skin tones.
Adding a few drops of these pigments to your clear Platinum silicone will give you an accurate foundation to mimic human flesh.
Mixing ratio is 2 to 3 drops per 10 grams of catalyzed silicone, (2 drops of pigments for softer silicones or silicone with additives).
S-Series SFX pigments (AKA Functional Intrinsic Skin Colors)
These are SFX base colors are great! What can I do with these colors? The names says it all...
These pigments go a long way. One 30 grams bottle can tint over 3,300 grams of catalyzed silicone (or approx. 7.2 pounds or 116.4 oz).
While the 500 grams bottle can tint over 100,000 grams or 100 kilos (approx. 27 gallons or 220 pounds) or more depending on the softness of the silicone.
Now THAT'S a lot of silicone!!!
Here's a link to S-Series pigment ratio to silicones: WS Matting Powder is the way to go.
FuseFX WS-Series Matting Powder is a unique blend of water base matting agents designed to eliminate the shine off of silicone painted surfaces, giving it a flat matt finish with little to no sheen.
When used with M/F-110 Clear, the WS Matting Powder creates a little to no sheen surface.
WS Matting Powder residue washes off clean with a little soap and warm water, dries clean and does not leave a "blue" tint to the surface unlike Cabosil.
Contains NO Amorphous Silca or Cabosil.
Flock can be helpful in coloring translucent resins or rubbers to give more depth of color.
The Ignite® line of liquid fluorescent colorants is compatible with Smooth-On urethane rubbers, urethane plastics, urethane foams (rigid and flexible) and silicones. The fluorescent or "glow" effect is maximized under ultra-violet light or "black light." The most dramatic color effect is realized when an Ignite colorant is used with a clear or translucent urethane rubber (such as Clear Flex 50) or plastic (such as Smooth-Cast 325).
The NEW Ignite® 9 pack gives you the opportunity to experience each color without spending a lot of money.
What Makes Castings Made With Ignite® Pigments Appear To Glow? When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong® colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.
Tom McLaughlin's excellent silicone pigments and accesories to pigment and paint any silicone surfaces - both tin and platinum. Vivid, silicone-safe pigments. No sulfur, no cadmium. Just about any color shade can be mixed with these pigments. All pigments are in the 'top rung' of permanence as far as 'synthetic' colors are concerned.
Mixing Info: SAM have been formulated so 1% by weight (1 part color to 100 parts silicone -or- 1 small squirt to 1/2 cup silicone by volume) will give a good representation of that color in translucent silicone. For full color saturation use up to 5%, although 3% will probably be all you will ever need. Use 0.5% or less for translucent effects. For painting use up to 5% mixed into translucent silicone rubber, paint base or adhesive / caulking for general coloration, up to to 10% for intense opaque detail. Thin to proper consistency with appropriate solvent.
Glow Worm® phosphorescent powders can be added to Smooth-On liquid plastics, rubbers and foams to create castings that glow in the dark after being charged with light. Choose from either green or blue.
What sets Glow Worm® powders apart from other glow-in-the-dark powders? Used as directed and after being light charged as recommended, castings made with Glow Worm® powders will glow in the dark at least 10 times longer than other glow powders.
Glow-in-the-dark castings are used for Halloween theming displays, home hobby projects, aquariums, store displays and more. These materials are also used for industrial marking, municipal safety applications and more.
Technical Bulletin Glow Worm
safety data sheet MSDS
Hier vindt u onze produkten gerangschikt naar diverse toepassingsmogelijkheden, zoals: Lifecasting, boetseren, afvormen, gieten, make-up, stuntwerk, dentaalwerk en studie.
Wij gebruiken cookies om onze website te optimaliseren en u de best mogelijke online ervaring te bieden. Door op "alles accepteren" te klikken gaat u hiermee akkoord. Geavanceerde instellingen